Node:Top, Next:, Previous:(dir), Up:(dir)

R Installation and Administration

This is a guide to installation and administration for R.

The current version of this document is 1.5.0 (2002-04-29). ISBN 3-901167-52-8

Node:Obtaining R, Next:, Previous:Top, Up:Top

Obtaining R

Sources, binaries and documentation for R can be obtained via CRAN, the "Comprehensive R Archive Network". See the file RESOURCES in the R distribution for information on CRAN.

Node:Getting and unpacking the sources, Next:, Previous:Obtaining R, Up:Obtaining R

Getting and unpacking the sources

The simplest way is to download the most recent R-x.y.z.tgz file, and unpack it with

tar xvfz R-x.y.z.tgz

on systems that have GNU tar installed. On other systems you need at least to have the gzip program installed. Then you can use

gzip -dc R-x.y.z.tgz | tar xvf -

If you need to transport the sources on floppy disks, you can download the R-x.y.z.tgz-split.* files and paste them together at the destination with (Unix)

cat R-x.y.z-split.* > R-x.y.z.tgz

and proceed as above. If you want the build to be usable by a group of users, set umask before unpacking so that the files will be readable by the target group (e.g., umask 022 to be usable by all users).

Finally, for patch releases (x.y.z with z != 0), a patch against the preceding release is made available in R-x.y.{z-1}-x.y.z.diff.gz (e.g., R-1.2.2-1.2.3.diff.gz), which is generally a much smaller file that the .tgz files. Such a file can be applied to the sources of the previous version by changing to the top directory of it and

gzip -dc /path/to/it/R-x.y.{z-1}-x.y.z.diff.gz | patch -E -p1

Beware that this does not necessarily work if the older sources have been modified (e.g., by building in their directories).

Node:Using rsync, Previous:Getting and unpacking the sources, Up:Obtaining R

Using rsync

Sources are also available via anonymous rsync. Use

rsync -rC R

to create a copy of the source tree specified by module in the subdirectory R of the current directory, where module specifies one of the four existing flavors of the R sources, and can be one of r-release (current released version), r-patched (patched released version), and r-devel (development version, less stable), and r-ng (next generation, unstable). The rsync trees are created directly from the master CVS archive and are updated hourly. The -C option in the rsync command is to cause it to skip the CVS directories. Further information on rsync is available at

Node:Installing R under Unix, Next:, Previous:Obtaining R, Up:Top

Installing R under Unix

R will configure and build from source under a number of common Unix-like platforms, including i386-freebsd, i386-linux-gnu, i386-sun-solaris, powerpc-linux-gnu, powerpc-apple-darwin, mips-sgi-irix, alpha-linux-gnu, alpha-dec-osf4, rs6000-ibm-aix, hppa-hp-hpux, sparc-linux-gnu and sparc-sun-solaris.

In addition, binary distributions are available for most common Linux distributions, Compaq Alpha systems running OSF/Tru64, and for MacOS X (Darwin) with X11. See the FAQ for current details. These are installed in platform-specific ways. So for the rest of this chapter we consider only building from the sources.

Node:Simple compilation, Next:, Previous:Installing R under Unix, Up:Installing R under Unix

Simple compilation

First review the essential and useful tools and libraries in Essential and useful other programs, and install those you want or need.

Choose a place to install the R tree (R is not just a binary, but has additional data sets, help files, font metrics etc). Let us call this place R_HOME. Untar the source code. This should create directories src, doc, and several more. Issue the following commands:


(See Using make if your make is not called make.)

Then check the built system works correctly, by

make check

Failures are not necessarily problems as they might be caused by missing functionality, but you should look carefully at any reported discrepancies. To re-run the tests you would need

make check FORCE=FORCE

If these commands execute successfully, the R binary will be copied to the R_HOME/bin directory. In addition, a shell-script front-end called R will be created and copied to the same directory. You can copy this script to a place where users can invoke it, for example to /usr/local/bin/R. You could also copy the man page R.1 to a place where your man reader finds it, such as /usr/local/man/man1. If you want to install the complete R tree to, e.g., /usr/local/lib/R, see Installation. Note: you do not need to install R: you can run it from where it was built.

You do not necessarily have to build R in the top-level source directory (say, TOP_SRCDIR). To build in BUILDDIR, run


and so on, as described further below. This has the advantage of always keeping your source tree "clean". (You may need GNU make to allow this.)

Make will also build plain text help pages as well as HTML and LaTeX versions of the R object documentation (the three kinds can also be generated separately using make help, make html and make latex). Note that you need Perl version 5: if this is not available on your system, you can obtain PDF versions of the documentation files via CRAN.

Now rehash if necessary, type R, and read the R manuals and the R FAQ (files FAQ or doc/html/faq.html, or which always has the latest version).

Node:Making the manuals, Next:, Previous:Simple compilation, Up:Installing R under Unix

Making the manuals

There is a set of manuals that can be built from the sources,

Printed versions of all the help pages.
R FAQ (which is already built for you).
"An Introduction to R".
"R Data Import/Export".
"R Installation and Administration", this manual.
"Writing R Extensions".
"The R Language Definition".

To make these, use

make dvi      to create DVI versions
make pdf      to create PDF versions
make info     to create info files (not refman).

You will not be able to build the info files unless you have makeinfo version 4 or later installed (and some Linux distributions have 3.12).

The DVI versions can be previewed and printed using standard programs such as xdvi and dvips. The PDF versions can be viewed using Acrobat Reader or (recent versions of) ghostscript: they have hyperlinks that can be followed in Acrobat Reader. The info files are suitable for reading online with Emacs or the standalone GNU Info.

Node:Installation, Previous:Making the manuals, Up:Installing R under Unix



make check

have been completed successfully, you can install the complete R tree to your system by typing

make install

This will install to the following directories:

the front-end shell script
the man page
all the rest (libraries, on-line help system, ...)

where prefix is determined during configuration (typically /usr/local) and can be set by running configure with the option --prefix, as in

./configure --prefix=/where/you/want/R/to/go

This causes make install to install the R executable to /where/you/want/R/to/go/bin, and so on. The prefix of the installation directories can be seen in the status message that is displayed at the end of configure. You can install into another directory by using

make prefix=/path/to/here install

To install DVI, info and PDF versions of the manuals, use one or more of

make install-dvi
make install-info
make install-pdf

To ensure that the installed tree is usable by the right group of users, set umask appropriately (perhaps to 022) before unpacking the sources and throughout the build process.

Node:Installing R under Windows, Next:, Previous:Installing R under Unix, Up:Top

Installing R under Windows

The bin/windows directory of a CRAN site contains binaries for a base distribution and a large number of add-on packages from CRAN to run on Windows 95, 98, NT4, 2000 and ME (at least) on Intel and clones (but not on other platforms).

You do need one of those Windows versions: Windows 3.11+win32s will not work.

Your file system must allow long file names (as is likely except perhaps for some network-mounted systems).

The simplest way is to use SetupR.exe or miniR.exe. Just double-click on the icon and follow the instructions. If you installed R this way you can uninstall it from the Control Panel or Start Menu (unless you suppressed making a group for R).

See the R Windows FAQ for more details.

Node:Building from source, Previous:Installing R under Windows, Up:Installing R under Windows

Building from source

If you want to build this port from the sources, see the file src/gnuwin32/INSTALL in the source distribution. You will need to collect, install and test an extensive set of tools: see for the current locations.

You may need to compile under a case-honouring file system: we found that a samba-mounted file system (which maps all file names to lower case) did not work. Open a commands window at a directory whose path does not contain spaces, and run something like

tar zxvf R-1.5.0.tgz
cd R-1.5.0\src\gnuwin32

sit back and wait (for about 5 minutes on 1GHz PIII with a fast local disc).

For further details, including how to make the documentation and how to cross-compile, see src/gnuwin32/INSTALL.

Node:Installing R on Classic MacOS, Next:, Previous:Installing R under Windows, Up:Top

Installing R on Classic MacOS

The bin/macos directory of a CRAN site contains bin-hexed (hqx) and stuffit (sit) archives for a base distribution and a large number of add-on packages to run under MacOS 8.6 to MacOS 9.1 or MacOS X natively. Just extract one of these archives in a suitable folder using standard utilities like Aladdin Stuffit Expander (tm).

There is also a port to MacOS X which is considered to be a Unix variant in this document. You can find it in the bin/macosx directory at of a CRAN site.

Node:Add-on packages, Next:, Previous:Installing R on Classic MacOS, Up:Top

Add-on packages

This chapter applies to Unix-like and Windows versions of R, but not to the Classic MacOS port.

It is helpful to use the correct terminology. A package is loaded from a library by the function library(). Thus a library is a directory containing installed packages; the main library is R_HOME/library, but others can be used, for example by setting the environment variable R_LIBS or using the R function .libPaths().

Node:Installing packages, Next:, Previous:Add-on packages, Up:Add-on packages

Installing packages

Installing source packages requires that Perl 5.005 or later be installed.

Note that you need to specify implicitly or explicitly the library to which the package is to be installed. This is only an issue if you have more than one library, of course.

To install packages from source on Unix use

R CMD INSTALL -l /path/to/library pkg1 pkg2 ...

The part -l /path/to/library can be omitted, when the first library in R_LIBS is used if set, otherwise the main library R_HOME/library.

The Windows equivalent is1

Rcmd INSTALL -l /path/to/library pkg1 pkg2 ...

Alternatively, packages can be downloaded and installed from within R. First set the option CRAN to your nearest CRAN mirror, for example

> options(CRAN = "")

Then download and install package foo by

> install.packages("foo")

Unless the library is specified (argument lib) the first library in the library search path is used.

What this does is different on Unix and Windows. On Unix it consults the list of available source packages on CRAN, downloads the latest version of the foo sources, and installs it (via R CMD INSTALL). On Windows it looks at the list of binary versions of packages and downloads the latest version (if any).

On Windows install.packages can also install a binary package from a local zip file by setting argument CRAN to NULL. RGui.exe has a menu Packages with a GUI interface to install.packages, update.packages and library.

Node:Updating packages, Next:, Previous:Installing packages, Up:Add-on packages

Updating packages

The command update.packages() is the simplest way to ensure that all the packages on your system are up to date. Set the CRAN option as in the previous section. The update.packages() downloads the list of available packages and their current versions, compares it with those installed and offers to fetch and install any that have later versions on CRAN.

An alternative way of keeping packages up-to-date is provided by the command packageStatus(), which returns an object with information on all installed packages and packages available at multiple repositories (CRAN, local archive, ...). The print and summary methods give an overview of installed and available packages, the upgrade method offers to fetch and install outdated packages. This allows R to fetch packages from several repositories and keep in sync with all of them, instead of only one CRAN mirror, and is intended to become the default package manager for future versions of R.

Node:Removing packages, Previous:Updating packages, Up:Add-on packages

Removing packages

Packages can be removed in a number of ways. From a command prompt they can be removed by

R CMD REMOVE -l /path/to/library pkg1 pkg2 ...

(Unix) or

Rcmd REMOVE -l /path/to/library pkg1 pkg2 ...


From a running R process they can be removed by

> remove.packages(c("pkg1", "pkg2"),
                  lib = file.path("path", "to", "library"))

Finally, in most installations one can just remove the package directory from the library.

Note: whereas it is currently possible to install package bundles, one cannot remove these as such--the packages contained in the bundle have to removed individually.

Node:Essential and useful other programs, Next:, Previous:Add-on packages, Up:Top

Essential and useful other programs

This appendix gives details of programs you will need to build R on Unix-like platforms, or which will be used by R if found by configure.

Node:Essential programs, Next:, Previous:Essential and useful other programs, Up:Essential and useful other programs

Essential programs

You need a means of compiling C and FORTRAN 77 (see Using FORTRAN). Some add-on packages also need a C++ compiler.

You will need Perl version 5.004 or later, available via, to build any of the on-line documentation.

You will not be able to build the info files unless you have makeinfo version 4 or later installed (and some Linux distributions have 3.12).

The typeset documentation needs tex and latex, or pdftex and pdflatex.

Node:Useful libraries and programs, Previous:Essential programs, Up:Essential and useful other programs

Useful libraries and programs

The command-line editing depends on the readline library available from any GNU mirror: you will need a fairly recent version.

Use of gzfile connections needs zlib (version 1.1.3 or later): if an installed version is not found, that in the R sources will be compiled in.

The bitmapped graphics devices jpeg() and png() need the appropriate libraries installed: jpeg (version 6b or later) or libpng (versions 1.0.5 to 1.2.1) and zlib (version 1.1.3 or later) respectively. libpng-1.2.2 has moved its header files, and you will need add something like -I/usr/local/include/libpng12 to CPPFLAGS to make use of it.

The bitmap and dev2bitmap devices make use of ghostscript (

bzfile connections make use of libbz2, part of bzip2 (

Node:Tcl/Tk, Next:, Previous:Useful libraries and programs, Up:Useful libraries and programs


The tcltk package needs Tcl/Tk installed: the sources are available at To specify the locations of the Tcl/Tk files you may need the configuration options

use Tcl/Tk, or specify its library directory
specify location of
specify location of

or use the configure variables TCLTK_LIBS and TCLTK_CPPFLAGS to specify the flags needed for linking against the Tcl and Tk libraries and for finding the tcl.h and tk.h headers, respectively.

Node:Linear algebra, Previous:Tcl/Tk, Up:Useful libraries and programs

Linear algebra

The linear algebra routines in R can make use of enhanced BLAS (Basic Linear Algebra Subprograms, routines. Some are compiler-system-specific (libsunperf on Sun Sparc2, libessl on IBM) but ATLAS ( is a "tuned" BLAS that runs on a wide range of Unix-alike platforms. If no more specific library is found, a libblas library in the library path will be used. You can specify a specific BLAS library by the configuration option --with-blas and not to use an external BLAS library by --without-blas.

For systems with multiple processors it is in principle possible to use a multi-threaded version of ATLAS. This is currently not supported. The problem is that SIGINT signals will not be handled properly when sent during a multi-threaded ATLAS computation, and this may result in a segmentation fault. Changes in the R internals are needed to support the use of threaded libraries; this will hopefully be addressed in a future release.

Note that the BLAS library will be used for several add-on packages as well as for R itself. This means that it is better to use a shared BLAS library, as most of a static library will be compiled into the R executable and each BLAS-using package.

You will need double-precision and double-complex versions of the BLAS, but not single-precision nor complex routines.

Optimized versions of LAPACK are available, but no provision is made for using them with R as the likely performance gains are thought to be small.

As with all libraries, you need to ensure that they and R were compiled with compatible compilers and flags. For example, this means that on Sun Sparc using the native compilers the flag -dalign is needed so libsunperf can be used.

An ATLAS `tuned' BLAS can also be used on Windows: see src/gnuwin32/INSTALL for how to enable this.

Note that under Unix (but not under Windows) if R is compiled against a non-default BLAS, then all BLAS-using packages must also be. So if R is re-built after ATLAS is installed, then packages such as quantreg will need to be re-installed.

Node:Configuration on Unix, Next:, Previous:Essential and useful other programs, Up:Top

Configuration on Unix

Node:Configuration options, Next:, Previous:Configuration on Unix, Up:Configuration on Unix

Configuration options

configure has many options: running

./configure --help

will give a list. Probably the most important ones not covered elsewhere are (defaults in brackets)

use the X Window System
X include files are in DIR
X library files are in DIR
use readline library (if available) [yes]
attempt to compile support for Rprof() [yes]
build R as a shared library [no]

You can use --without-foo or --disable-foo for the negatives.

You will want to use --disable-R-profiling if you are building a profiled executable of R (e.g. with -pg).

Flag --enable-R-shlib causes the make process to build R as a shared library, typically called, and to take considerably longer, so you probably only want this if you will be using an application which embeds R.

Node:Configuration variables, Next:, Previous:Configuration options, Up:Configuration on Unix

Configuration variables

If you need or want to set certain configure variables to something other than their default, you can do that by either editing the file (which documents all the variables you might want to set) or on the command line as

./configure VAR=value

These variables are precious, implying that they do not have to be exported to the environment, are kept in the cache even if not specified on the command line and checked for consistency between two configure runs (provided that caching is used), and are kept during automatic reconfiguration as if having been passed as command line arguments, even if no cache is used.

See the variable output section of configure --help for a list of all these variables.

One common variable to change is R_PAPERSIZE, which defaults to a4, not letter.

If you have libraries and header files, e.g., for GNU readline, in non-system directories, use the variables LDFLAGS (for libraries, using -L flags to be passed to the linker) and CPPFLAGS (for header files, using -I flags to be passed to the C/C++ preprocessors), respectively, to specify these locations. These default to /usr/local/lib and /usr/local/include to catch the most common cases. If libraries are still not found, then maybe your compiler/linker does not support re-ordering of -L and -l flags (this has been reported to be a problem on HP-UX with the native cc). In this case, use a different compiler (or a front end shell script which does the re-ordering).

If you find you need to alter configure variables, it is worth noting that some settings may be cached in the file config.cache, and it is a good idea to remove that file (if it exists) before re-configuring. Note that caching is turned off by default; use the command line option --config-cache (or -C) to enable caching.

Node:Using make, Next:, Previous:Configuration variables, Up:Configuration on Unix

Using make

To compile R, you will most likely find it easiest to use GNU make. On Solaris 2.6/7/8 in particular, you need a version of GNU make different from 3.77; 3.79 works fine, as does the Sun make. The native make is reported to fail on SGI Irix 6.5.

To build in a separate directory you need a make that uses the VPATH variable, for example GNU make, or Sun make on Solaris 2.7/8 (but not earlier).

If you want to use a make by another name, for example if your GNU make is called gmake, you need to set the variable MAKE at configure time, for example

./configure MAKE=gmake

Node:Using FORTRAN, Next:, Previous:Using make, Up:Configuration on Unix


To compile R, you need a FORTRAN compiler or f2c, the FORTRAN-to-C converter ( The default is to search for g77, f77, xlf, cf77, cft77, pgf77, fl32, af77, fort77, f90, xlf90, pgf90, epcf90, f95, xlf95, lf95, g95, and fc (in that order)3, and then for f2c, and use whichever is found first; if none is found, R cannot be compiled. The search mechanism can be changed using the configure variables F77 and F2C which specify the commands that run the FORTRAN 77 compiler and FORTRAN-to-C converter, respectively. If F77 is given, it is used to compile FORTRAN; otherwise, if F2C is given, f2c is used even if a FORTRAN compiler would be be available. If your FORTRAN compiler is in a non-standard location, you should set the environment variable PATH accordingly before running configure, or use the configure variable F77 to specify its full path.

If your FORTRAN libraries are in slightly peculiar places, you should also look at LD_LIBRARY_PATH or your system's equivalent to make sure that all libraries are on this path.

You must set whatever compilation flags (if any) are needed to ensure that FORTRAN integer is equivalent to a C int pointer and FORTRAN double precision is equivalent to a C double pointer. This is checked during the configuration process.

Some of the FORTRAN code makes use of COMPLEX*16 variables, which is a FORTRAN 90 extension. This is checked for at configure time4, but you may need to avoid compiler flags5 asserting FORTRAN 77 compliance.

For performance reasons6 you may want to choose a FORTRAN 90/95 compiler.

If you use f2c you may need to ensure that the FORTRAN type integer is translated to the C type int. Normally f2c.h contains typedef long int integer;, which will work on a 32-bit platform but not on a 64-bit platform.

Node:Compile and load flags, Next:, Previous:Using FORTRAN, Up:Configuration on Unix

Compile and load flags

A wide range of flags can be set in the file or as configure variables on the command line. We have already mentioned

header file search directory (-I) and any other miscellaneous options for the C and C++ preprocessors and compilers
path (-L), stripping (-s) and any other miscellaneous options for the linker

and others include

debugging and optimization flags, C
ditto, for compiling the main program
for shared libraries
debugging and optimization flags, FORTRAN
ditto, for compiling the main program
for shared libraries
additional flags for the main link
additional flags for linking the shared libraries

Library paths specified as -L/lib/path in LDFLAGS are collected together and prepended to LD_LIBRARY_PATH (or your system's equivalent), so there should be no need for -R or -rpath flags.

To compile a profiling version of R, one might for example want to use MAIN_CFLAGS=-pg, MAIN_FFLAGS=-pg, MAIN_LDFLAGS=-pg on platforms where -pg cannot be used with position-independent code.

Beware: it may be necessary to set CFLAGS and FFLAGS in ways compatible with the libraries to be used: one possible issue is the alignment of doubles, another is the way structures are passed.

Node:Building the GNOME interface, Next:, Previous:Compile and load flags, Up:Configuration on Unix

Building the GNOME interface

This interface is experimental and incomplete. It provides a console and two graphics devices named gtk() and gnome(). The console offers a basic command line editing and history mechanism, along with tool and button bars that give a point-and-click interface to some R commands. Many of the features of the console are currently stubs. The gtk() graphics device is a port of the x11() device to GDK (the GIMP Drawing Kit). The gnome() device uses the GNOME canvas.

Due to its experimental nature, the GNOME interface for R will not be built automatically. You must specify it by running configure with the --with-gnome option. For example, you might run

./configure --with-gnome

but please check you have all the requirements first. The GNOME interface for R is currently being developed under GNOME 1.4, and is not guaranteed to work with previous versions. You therefore need at least the following libraries installed


It is preferable to have a complete installation of the GNOME desktop environment. If you use Linux, then this should be provided with your distribution. In addition, packaged binary distributions of GNOME are available from for the most popular Linux distributions and for Solaris.

Remember that some package management systems (such as RPM and deb) make a distinction between the user version of a package and the developer version. The latter usually has the same name but with the extension -devel. If you use a pre-packaged version of GNOME then you must have the developer versions of the above packages in order to compile the R-GNOME interface.

The full list of GNOME options to configure is

use GNOME, or specify its prefix [no]
specify location of GNOME headers
specify location of GNOME libs
specify location of libglade-config

Node:Platform notes, Previous:Building the GNOME interface, Up:Configuration on Unix

Platform notes

This section provides some notes on building R on different Unix-like platforms. These notes are based on tests run on one or two systems in each case with particular sets of compilers and support libraries. Success in building R depends on the proper installation and functioning of support software; your results may differ if you have other versions of compilers and support libraries.

Node:MacOS X, Next:, Previous:Platform notes, Up:Platform notes


You can build R as a Unix application on MacOS X. You will need the DevTools, f2c or g77, and the dlcompat library. You will also need to install an X sub-system or configure with --without-x.

f2c, g77, the dlcompat library, and X server and support libraries are available from the Fink project ( At the time of writing f2c and g77 were not available as part of the Fink binary distribution and needed to be installed directly; for example for g77 use

fink install g77

Fink prefers to install in /sw so CPPFLAGS and LDFLAGS need to be set accordingly. If you want to use Tcl/Tk, also available from Fink, then you will also need to use the configure options to specify the Tcl and Tk config locations.

Node:Solaris, Next:, Previous:MacOS X, Up:Platform notes

Solaris on Sparc

R has been built successfully on Solaris 2.7 aka Solaris 7 aka SunOS 5.7 using gcc/g77 and the SunPro WorkShop 6 compilers, and less regularly on Solaris 2.5.1, 2.6 and 8. GNU make is needed prior to 2.7 for building other than in the source tree, and perhaps even then.

If using gcc, do ensure that the compiler was compiled for the version of Solaris in use. (This can be discerned from gcc -v.) gcc makes modified versions of some header files, and so (for example) gcc compiled under Solaris 2.6 will not compile R under Solaris 2.7.

When using the SunPro compilers do not specify -fast, as this disables IEEE arithmetic and make check will fail. The maximal set of optimization options known to work is

-xlibmil -xO5 -dalign

We have found little performance difference between gcc and cc but considerable benefit from using a SunPro Fortran compiler: the gcc/f77 combination works well.

To compile for a 64-bit target on Solaris (which needs an UltraSparc chip and for support to be enabled in the OS) we used

CC="cc -xarch=v9"
CFLAGS="-xO5 -xlibmil -dalign"
F77="f95 -xarch=v9"
FFLAGS="-xO5 -xlibmil -dalign"
CXXFLAGS="-xO5 -xlibmil -dalign -xarch=v9"

in Note that using f95 allows the Sun performance library to be selected: it will not work with f77, nor with g77.

Some care is needed to ensure that libraries found by configure are compatible with the R executable and modules, as the testing process will not detect many of the possible problems. For 32-bit builds under cc the flag -dalign is needed for some of the Sun libraries: fortunately the equivalent flag for gcc, -munaligned-doubles, is the default. In theory, libraries such as libpng, libjpeg, zlib and the ATLAS libraries need to be built with a pic or PIC flag, which could be a problem if static libraries are used. In practice this seems to give little problem for 32-bit builds, but seems essential for 64-bit builds.

For a 64-bit build, 64-bit libraries must be used. As the configuration process starts by default sets LDFLAGS to -L/usr/local/lib you may need to reset it to avoid finding 32-bit addons.

Node:HPUX, Next:, Previous:Solaris, Up:Platform notes


R has been built successfully on HPUX 10.2 and HPUX 11.0 using both native compilers and gcc. However, 10.2 has not been tested since R 1.4.0. By default, R is configured to use gcc and g77 on HPUX (if available). Some installations of g77 only install a static version of the g2c library that cannot be linked into a shared library since its files have not been compiled with the appropriate flag for producing position independent code (PIC). This will result in make failing with a linker error complaining that code needs to be compiled with a +z or +Z flag, the native cc PIC flag. If this is the case you either need to modify your g77 installation or configure with


to specify use of the native POSIX-compliant FORTRAN 77 compiler.

You may find that configure detects other libraries, such as BLAS, that R needs to use as shared libraries but are only available as static libraries. If you cannot install shared versions you will need to tell configure not to use these libraries.

Some versions of gcc may contain what appears to be a bug at the -O2 optimization level that causes

> 2 %/% 2
[1] 1
> 1:2 %/% 2
[1] 0 0     # wrong!!

which will cause make check to fail. If this is the case, you should use CFLAGS to specify -O as the optimization level to use.

Some systems running HPUX 11.0 may have a gcc that was installed under HPUX 10.2. Between versions 10.2 and 11.0 HPUX changed its support functions for IEEE arithmetic from the recommended functions of the IEEE standard to the ones specified in the C9x draft standard. In particular, this means that finite has been replaced by isfinite. A gcc configured for HPUX 10.2 run on 11.0 will not find isfinite, and as a result configure does not recognize the machine as fully supporting IEEE arithmetic and does not define IEEE_754 when compiling C code. This results in a failure in make check. The best solution is to install a properly configured gcc. An alternative work-around is to add -DIEEE_754 to the CFLAGS variable.

You can configure R to use both the native cc and fort77 with

./configure CC=cc F77=fort77

f90 insists on linking against a static libF90.a which typically resides in a non-standard directory (e.g., /opt/fortran90/lib). Hence, to use f90 one needs to add this directory to the linker path via the configure variable LDFLAGS (e.g., ./configure F77=f90 LDFLAGS=/opt/fortran90/lib).

Node:IRIX, Next:, Previous:HPUX, Up:Platform notes


R has been built successfully on IRIX64 6.5 using gcc/f77 or cc/f77 for 32-bit executables and the native compilers for a 64-bit executable. The command

./configure CC="cc -64" F77="f77 -64" --with-tcltk=no

was used to create the 64-bit executable. It was necessary to explicitly omit Tcl/Tk because configure would find the 32-bit version but not detect that is was incompatible with a 64-bit build.

A 32-bit build using gcc/g77 passed make check but failed make test-all-extras in the complex LAPACK tests.

Node:Alpha/OSF1, Next:, Previous:IRIX, Up:Platform notes


R has been built successfully on an Alpha running OSF1 V4.0 using gcc/g77 and cc/f77. Mixing cc and g77 fails to configure. The configure option --without-blas was used since the native blas seems not to have been built with the flags needed to suppress SIGFPE's. Currently R does not set a signal handler for SIGFPE on platforms that support IEEE arithmetic, so these are fatal.

make check passes with no problems.

Node:Alpha/FreeBSD, Next:, Previous:Alpha/OSF1, Up:Platform notes


Attempts to build R on an Alpha with FreeBSD 4.3 have been only partly successful. Configuring with -mieee added to both CFLAGS and FFLAGS builds successfully, but tests fail with SIGFPE's. It would appear that -mieee only defers these rather than suppressing them entirely. Advice on how to complete this port would be greatly appreciated.

Node:AIX, Previous:Alpha/FreeBSD, Up:Platform notes


On AIX 4.3.3 and AIX 5.1, it was found that the use of "run time linking" (as opposed to normal AIX style linking) was required. For this, the R main program must be linked to the runtime linker with the -brtl linker option, and shareable objects must be enabled for runtime linking with the -G linker option. Without these options, the AIX linker will not automatically link to any shared object with a .so extension. Also, the R main program is unable to dynamically load modules (such as X11) with the dlopen call.

When setting MAIN_LDFLAGS and SHLIB_LDFLAGS accordingly, note that linker flags must be escaped using -Wl, if gcc is used for linking: use MAIN_LDFLAGS="-Wl,brtl" and SHLIB_LDFLAGS="-Wl,-G" in this case.

Node:New platforms, Next:, Previous:Configuration on Unix, Up:Top

New platforms

There are a number of sources of problems when installing R on a new hardware/OS platform. These include

Floating Point Arithmetic: R supports the POSIX, SVID and IEEE models for floating point arithmetic. The POSIX and SVID models provide no problems. The IEEE model however can be a pain. The problem is that there is no agreement on how to set the signalling behaviour; Sun/Sparc, SGI/IRIX and ix86 Linux require no special action, FreeBSD requires a call to (the macro) fpsetmask(0) and OSF1 requires that computation be done with a -ieee_with_inexact flag etc. On a new platform you must find out the magic recipe and add some code to make it work. This can often be done via the file which resides in the top level directory.

Beware of using high levels of optimization, at least initially. On many compilers these reduce the degree of compliance to the IEEE model. For example, using -fast on the Solaris SunPro compilers causes R's NaN to be set incorrectly.

Shared Libraries: There seems to be very little agreement across platforms on what needs to be done to build shared libraries. there are many different combinations of flags for the compilers and loaders. GNU libtool cannot be used (yet), as it currently does not fully support FORTRAN (and will most likely never support f2c: one would need a shell wrapper for this). The technique we use is to first interrogate the X window system about what it does (using xmkmf), and then override this in situations where we know better (for tools from the GNU Compiler Collection and/or platforms we know about). This typically works, but you may have to manually override the results. Scanning the manual entries for cc and ld usually reveals the correct incantation. Once you know the recipe you can modify the file (following the instructions therein) so that the build will use these options.

If you do manage to get R running on a new platform please let us know about it so we can modify the configuration procedures to include that platform.

If you are having trouble getting R to work on your platform please feel free to get in touch to ask questions. We have had a fair amount of practice at porting R to new platforms ....

Node:Function and variable index, Next:, Previous:New platforms, Up:Top

Function and variable index

Node:Concept index, Previous:Function and variable index, Up:Top

Concept index


  1. if you have the source-code package files installed

  2. Using the SunPro cc and f95 compilers

  3. On HPUX fort77 is the POSIX compliant FORTRAN compiler, and comes second in the search list.

  4. as well as its equivalence to the Rcomplex structure defined in R_ext/Complex.h.

  5. In particular, avoid g77's -pedantic, which gives confusing error messages.

  6. e.g., to use an optimized BLAS on Sun/Sparc